PAC-CLAD (Petersen Aluminum Corp.) - Page 1

Items Tagged with 'PAC-CLAD (Petersen Aluminum Corp.)'

ARTICLES

Corporate Campus Adds Rural Appeal with Standing-Seam Metal Roof

87,000 sq. ft. of the panels in a Graphite finish were used in the project

July 11, 2025

Designers, along with the installation team from Raleigh-based Baker Roofing Services, specified PAC-CLAD Tite-Loc Plus panels from Petersen for these buildings.

Petersen Adds Reps to Meet Metal Cladding Demand in Northern California

June 5, 2020

Petersen continues to meet the growing demand in the Western United States for its PAC-CLAD metal roof and wall products by hiring new representatives in the region.

PAC-CLAD Metal Wall Panels Approved for NFPA 285 Assembly With Spray Foam Insulation

June 4, 2020

PAC-CLAD metal wall panels from Petersen have passed the requirements of the National Fire Protection Association 285 Standard for exterior wall assemblies.

Contemporary Structure Reflects Local History

January 20, 2017

The new home for the Homewood Board of Education Central Office in Alabama is a modern 14,500-square-foot structure, which marks the first phase of a long-term development plan

Case Study: PAC-CLAD Metal Panels Redefine Marist School’s Appearance

Unique design with aluminum composite panels offers greater affordability and sustainability

March 2, 2016

Two PAC-CLAD profiles were specified for roofing and wall applications on the three-story, highly-sustainable structure.

Health Facility’s LEED Silver Design Reflects Cherokee History

February 16, 2016

The Vinita Health Center is an addition to the Cherokee Nation Health System, the largest tribally owned health care system in the U.S.

Design for Non-Profit Resort Focuses on Creativity

February 11, 2016

The new building is the centerpiece of a non-profit resort that provides cost-free, vacations for children with life-threatening illnesses

Metal, Stone, Glass Together on Health Center

November 20, 2015

The two-story, 78,000-square-foot center consolidates three older health clinics into an attractive new facility more centrally located to serve the patient community

Design Files for Metal Roof, Wall Panels Available on Online Platforms

August 18, 2015

Architects and designers now have multiple options for digitally locating and specifying Petersen Aluminum products during the design phase of any project.

Environmental Product Declaration for Designers

May 14, 2015

Petersen Aluminum’s recently released Environmental Product Declaration delivers cradle-to-grave transparency for the manufacturing, installation, maintenance and recycling of its roll-formed steel and aluminum roof and wall panels.

More Articles Tagged with 'PAC-CLAD (Petersen Aluminum Corp.)'

Credits: 1 AIA LU/HSW; 0.1 ICC CEU; 1 IIBEC CEH; 0.1 IACET CEU

On Demand In modern roofing systems, vapor retarders and air barriers do more than just minimize air leakage—they’re essential to maximizing performance and longevity. This engaging course dives into the next generation of moisture control: permeable vapor retarders and air barriers. Discover how these cutting-edge technologies are transforming low-slope roofing assemblies by improving energy efficiency, managing moisture, and boosting wind uplift resistance.

Credits: 1 AIA LU/HSW ; 1 IIBEC CEH; 0.1 IACET CEU

On-Demand Designing a high-performance building enclosure requires more than just surface-level protection; it demands a rigorous, performance-based mastery of below-grade water and gas mitigation. This discussion will provide an expert-level analysis of below-grade waterproofing within the comprehensive framework of the high-performance building enclosure.