Codes

RSS

This section provides the requirements for foundation drain placement. The section is precise in the requirements and provides a basis for design.

Clay roof tile shall comply with ASTM C 1167.

This section implies that a base course a minimum of 4 inches thick is required under all basement floors.

Liquid-applied roofing shall have a design slope of a minimum of 1/4 unit vertical in 12 units horizontal.

Where a hydrostatic pressure condition does not exist, dammproofing shall be provided and a base shall be installed under the floor and a drain installed around the foundation perimeter.

The installation of liquid-applied roofing shall comply with the provisions of this section.

This section implies that all wall and floor joints must be properly waterproofed.

This code implies that all roof materials that pass the testing provided in the ASTM E 108 fire testing under the light category are identified as Class C roof assemblies.

This section implies that the wall substrate must be properly prepared to receive waterproofing materials.

Roof replacements shall comply with Section C402.1.3, C402.1.4, C402.1.5 or C407 where the existing roof assembly is part of the building thermal envelope and contains insulation entirely above the roof deck.