1504.1.1 Wind resistance of asphalt shingles. Asphalt shingles shall be installed in accordance with Section 1507.2.7. For roofs located where the basic wind speed in accordance with Figure 1609 is 100mph or greater, asphalt shingles shall be tested in accordance with ASTM D 3161, Class F. As an alternative, load and wind resistance of asphalt shingle roof coverings shall be determined in accordance with Section 1609.5.2.
Section 1504.3.1 Wind resistance of low-slope roof systems: The low-slope roof systems described in Section 1504 which are mechanically attached, adhered to the roof deck or ballasted shall be designed to resist the design wind load pressures of Section 1609.0. Roof systems with built-up, modified bitumen, fully adhered or mechanically attached single-ply, metal panels, and other types of membrane roof coverings shall also be tested in accordance with FM 4450, FM 4470, UL 580 or UL 1897 listed in Chapter 35.